Polymarket Perps Fees: 0.04% Taker, Seven Tiers and Hourly Funding

Two separate costs hit every Perps position — a fee at fill time and funding every hour. One of them is visible on your statement, the other quietly eats the trade.

9 min read · Polymarket Perps
⚡ The sixty-second version
  • Trading fee: |Price × Quantity| × Rate, charged per fill on notional. Base tier is 0.0400% taker / 0.0125% maker.
  • Seven tiers by trailing 30-day volume: $0, $1M, $5M, $25M, $100M, $500M, $1B. Re-evaluated every UTC day.
  • At $1B the maker fee turns negative — a 0.0050% rebate, not a cost. Only the top tier earns a rebate; every tier below pays a positive maker fee.
  • Funding settles hourly, is sampled every 5 seconds, and is a transfer between traders — the protocol takes nothing.
  • The number nobody budgets: 0.01%/hour on $10,000 is $72 a month. That is 14.4% of the collateral behind a 20x position.

Perps has two cost structures and retail traders usually plan for one. The trading fee is a percentage of notional charged the moment your order fills. Funding is an hourly transfer you pay for as long as the position stays open. The first you can see on every fill confirmation. The second accumulates in the background and only becomes obvious on a long hold — which is exactly when a "winning" trade turns into a losing one.

Scope note. Fee tiers, leverage tiers and liquidation fee rates are market-specific and change over time. Polymarket publishes the live schedule in its Perps fee documentation. The values below were correct when this page was written and are here so you can reason about the arithmetic — always confirm the current number before sizing a trade around it.

How the fee is calculated

Fee per fill Fee = | Price × Quantity | × Rate Denominated in the instrument's quote asset, pUSD. The rate is set by the account's current volume tier at the time of the fill.

Three properties of that formula matter more than the rate itself.

It is charged on notional, not on profit. A losing trade pays the same fee as a winning one of the same size. This is the structural difference from a prediction market, where the cost is embedded in the spread between bid and ask and you pay it once.

It is charged per fill. An order that fills in five pieces pays five times. Splitting orders to reduce market impact is rational, but it is not free.

It is charged at match time. The fee is fixed the instant your order fills, regardless of what happens afterwards. So the round-trip cost of a trade is known before you enter: roughly two taker fees, or a taker plus a maker if you exit on a resting order.

The seven volume tiers

Tier is determined by trailing 30-day trading volume and re-evaluated every UTC day. New accounts start at the $0 tier.

Trailing 30-day volume ≥TakerMakerWhat changes
$00.0400%0.0125%Where every account starts
$1M0.0370%0.0100%First meaningful taker cut — 7.5% lower
$5M0.0350%0.0080%Maker rate now below base taker by 4.4×
$25M0.0300%0.0050%Taker down 25% from base
$100M0.0270%0.0020%Maker fee becoming nominal
$500M0.0250%0.0000%Maker is free
$1B0.0200%−0.0050%Maker is paid — a rebate

Both rates fall as volume rises, but the maker rate falls faster and crosses zero at the $1B tier. Below zero it is a rebate: the maker receives the amount rather than paying it.

The rebate is real but narrow. A negative maker fee means the maker receives the rebate and the fee recipient's internal ledger is debited by the same amount. It exists only at the $1B tier. Every tier below it pays a positive maker fee — so "I'll just be a maker and get paid" is not true at retail volume, it is simply cheaper than taking.

The gap between taker and maker is now large enough to dominate most other cost decisions. At the base tier, taking is 3.2× more expensive than making. On a $10,000 notional that is $4.00 versus $1.25 — a $2.75 difference per side, $5.50 per round trip. Over 100 round trips that is $550, which exceeds the entire initial margin of a 20x position at that notional.

The builder fee nobody mentions

If you trade through a third-party front end rather than the venue itself, there may be a fourth cost:

Orders placed through an enabled builder can carry an additional trader-approved fee of up to 10 basis points. That is 0.10% — more than twice the base taker rate — and it stacks on top of the exchange schedule rather than replacing it.

Cost componentBase rate at $0 tierNotes
Exchange taker fee0.0400%Always applies when you remove liquidity
Builder fee (if enabled)up to 0.1000%Trader-approved, per builder, stacks on the above
Total possible0.1400%3.5× the headline fee

The practical rule: when comparing front ends, compare the total cost, not the exchange schedule. A front end that charges 10 bps is not expensive because of the exchange — it is expensive because of the builder layer, and that is a choice you are making, not a fee the venue is imposing.

Funding: how the rate is actually produced

Perpetuals have no expiry, so nothing forces the contract price back to spot at a fixed date. Funding replaces that force. It runs continuously across all sessions, whether or not the underlying reference market is open, so positions are never left unanchored from fair value.

It happens in three stages.

StageCadenceWhat happens
1. Premium samplingevery 5 secondsThe protocol walks the book for 1,000 quote notional on each side and measures how far the impact price sits from index. If one side is too thin to fill that notional, it falls back to index and its contribution zeroes out.
2. Averagingover 1 hourPremium samples are averaged across the charge window and passed through the 8-hour funding formula.
3. Settlementonce per windowThe hourly rate is applied to every open position. Credited or debited from the quote balance, tracked separately from trading P&L.
Premium index IPD = max(bid_impact − Index, 0) − max(Index − ask_impact, 0) PremiumIndex = IPD ÷ Index
A positive premium means the perp trades rich versus index. Negative means it trades cheap. The two-sided max construction is why a book that is rich on one side and thin on the other does not produce a distorted reading.
Hourly funding rate F₈ₕ = scale × ( mean_P + clamp(0.0001 − mean_P, ±0.0005) ) FR_hour = clamp(F₈ₕ ÷ 8, ±0.04)
mean_P = average PremiumIndex over the window
scale = 1.0 crypto, 0.5 everything else
The 0.0001 term is a fixed 0.01%-per-8h interest leg. The ±0.0005 clamp bounds the interest-versus-premium adjustment. The ±0.04 cap is 4% per hour.

Read the formula for what it implies, not just what it computes. The interest leg is always present, so a perfectly balanced book still produces a small positive rate — meaning longs pay a small amount even with zero premium. The scale factor halves that sensitivity on non-crypto markets. And the 4% per hour cap is the number that should stop you: it is the venue acknowledging that during sustained dislocation, funding can reach a level that compounds faster than most positions can survive.

Market stateHourly rateLongsShorts
Perp trading above indexpositivePayReceive
Perp trading below indexnegativeReceivePay

What funding actually costs over a hold

This is the table to remember. Funding is charged on notional, so the cost scales with position size, not with how much of your own money is in it — which means it scales faster as leverage rises.

Hourly ratePer day
($10k notional)
Per 7 daysPer 30 days30-day cost as % of 20x collateral ($500)
0.001%$2.40$16.80$72.0014.4%
0.005%$12.00$84.00$360.0072.0%
0.010%$24.00$168.00$720.00144.0%
0.020%$48.00$336.00$1,440.00288.0%

At 0.01% per hour — an ordinary reading, nowhere near the cap — a 30-day hold costs 144% of the collateral behind a 20x position. The position does not need to move against you to be destroyed. Funding alone does it.

This is the mechanism behind most "I was right and still lost" stories. A trader takes a directional view, the market eventually agrees, but the position was held long enough that funding consumed the collateral first. Leverage compresses the timeline: at 20x you have very little room for any cost that scales with time, and funding is exactly that.

The mitigation is not exotic. Shorten holds. Prefer the side that receives funding — if the rate is positive, shorts are being paid. And check the published rolling premium and implied rate before entering a hold you intend to keep, because those are visible between settlements.

The fee you only see when it is too late

While an account is flagged as liquidating, every fill pays an extra rate on top of the normal maker or taker fee:

Fee during liquidation FillFee = Notional × (MakerOrTakerRate + LiquidationFeeRate) Liquidation fee rates vary by market and should be read from the live instrument data. Auto-deleveraging fills bypass the order book and carry no fee for either side.

So a liquidation is not a clean exit at your threshold. It is a market-priced immediate-or-cancel sweep with no protective spread, paying an elevated fee rate, in exactly the conditions — thin book, fast move — where slippage is worst. The realised loss typically exceeds the equity level that triggered the liquidation.

Mechanics of that process are on Perps liquidation.

The all-in cost of a trade

Adding the components together gives the number that should govern strategy:

Round-trip cost as a percentage of notional Cost ≈ Fee_in + Fee_out + Funding × HoursHeld + BuilderFee × 2 Taker in and taker out at base tier = 0.08% of notional.
One hour of funding at 0.01% = 0.01%.
Builder fee at 10bps on both legs = 0.20%.
Total for a one-hour round trip through a builder: 0.29% of notional — before slippage.

To break even on that, the position must move 0.29% in your favour. At 20x that is 5.8% of your collateral. At 2x, 0.58%. This is why higher leverage does not improve your edge: it multiplies a gross move that must first clear a fixed cost, and the cost is charged on the same notional either way.

Strategy shapeRound-trip costBreak-even move neededVerdict
Maker in, maker out, no builder, held an hour~0.026%0.026%Cheapest possible
Taker in, taker out, no builder, held an hour~0.09%0.09%Sustainable
Taker round trip, held 24 hours at 0.01%/h~0.32%0.32%Needs a real edge
Taker round trip through a builder, held 24 hours~0.52%0.52%Cost is the strategy
Taker round trip, held 30 days at 0.01%/h~7.28%7.28%Unviable at 20x

Full sizing arithmetic, including how to translate that break-even into a position size, is on leverage and position sizing.

Frequently asked questions

Are Polymarket Perps fees higher than the prediction markets?

They are structured differently and not directly comparable. Prediction market fees are charged per trade as shares × feeRate × price × (1 − price), so they peak on 50¢ markets and approach zero near the extremes. Perps fees are a flat percentage of notional. Our prediction market fee guide covers the other side.

Does funding get charged if my position is closed before the hour ends?

Settlement happens at the end of each 1-hour charge window against every open position at that moment. A position closed mid-window is not open at settlement, so no funding is applied for that window. This is why very short holds are the one structure where funding is genuinely negligible.

Can the funding rate be negative?

Yes. A negative hourly rate means the perp is trading below index, shorts pay and longs receive. The formula is symmetric — the interest leg pulls toward positive but the premium term can overwhelm it, and the whole result is capped at ±4% per hour.

Is the maker rebate available below $1B volume?

No. Every tier below $1B pays a positive maker fee. At $500M the maker fee reaches 0.0000%, which is free rather than paid. Only the $1B tier produces a negative maker rate of −0.0050%.

Do I pay fees on auto-deleveraging?

No. Auto-deleveraging fills bypass the order book entirely and carry no fee for either side. Both legs settle at the defined execution price and each side's realised P&L is credited to its quote balance.

What are the trailing 7-day fee metrics shown in my account?

Total volume, taker volume, maker volume, account maker share and entity maker share. They are a rolling view for visibility only — they do not determine the volume tier used to set your fee. They are cached by UTC day and may be stale by up to 24 hours.

See the costs in action. The Polymarket Perps Simulator charges the 0.04% taker fee on every open and close, so you can see what fees do to a leveraged trade with practice money. Check a thesis before you pay for it. The Polymarket Simulator lets you trade prediction markets against a live order book with no capital at risk. If your read on a probability does not beat the crowd there, no fee structure will save it with leverage added.

See the Live Fee Tier on Your Own Account

Fee schedules in any article are structural — the tier that actually applies to you is set by your rolling 30-day volume and shown in your account. Opening Polymarket costs nothing, and the base 0.0400% taker rate applies from the first dollar of volume.

Open Polymarket →