Polymarket Perps Liquidation Price: The Formula, and How to Move It Further Away

Liquidation is not triggered by the price on your chart. It is triggered by a ratio, measured on mark price, against a maintenance margin that never moves.

10 min read · Polymarket Perps
⚡ The sixty-second version
  • The trigger is a ratio: Equity ÷ MaintenanceMargin < 1.0. Not a price you set, not your entry, not the last trade you saw.
  • Equity is measured on mark price. Mark is calculated by the protocol. It can differ from the last print on your chart.
  • Maintenance margin is flat: 0.5 ÷ max leverage per market — 2.5% on a 20x market, for every position, at every size.
  • The exit is a market order. Reduce-only, immediate-or-cancel, market-priced. No protective spread. In a thin book you exit worse than the threshold that triggered you.
  • Two steps below: below ~⅔ of maintenance margin the insurance fund absorbs the position; if it cannot, auto-deleveraging force-closes against the opposite side — including profitable traders, without notice.

Most liquidation explanations describe a price. That is the wrong mental model and it is why people are consistently surprised. On Polymarket Perps, liquidation is a comparison between two numbers that both move independently of the price you entered at: your equity, which follows mark price, and your maintenance margin, which is a fixed percentage of notional.

Before anything else. Leveraged trading can lose your entire collateral faster than you can react, and liquidation guarantees a forced exit at a moment you did not choose. This page explains published mechanics so you can verify them against Polymarket's own documentation. It is not advice and it is not a recommendation to trade.

The trigger: a ratio, not a price

Margin ratio MarginRatio = Equity ÷ MaintenanceMargin Liquidation starts when MarginRatio < 1.0, i.e. when Equity < MM.
Margin health is re-evaluated continuously — the system reacts as soon as a new mark price, a fill or a deposit moves the account across the threshold.
Both sides of the comparison Equity = Collateral + UnrealisedPnL(Mark) − FeesDue − FundingDue MM = Notional × (0.5 ÷ MaxLeverage)
MMR is flat per market: 2.5% on a 20x market, independent of position size, tier and your own leverage setting.

Because MM is fixed as a percentage of notional, and equity moves with mark, the two cross at a specific price — which is what people call the liquidation price. You can solve for it. But the derivation matters more than the answer, because it explains why the number changes when nothing about your position did.

Deriving your liquidation price

Set equity equal to maintenance margin and solve for the mark at which that happens. For a long position:

Long liquidation price (isolated, no fees or funding) LiqPrice = Entry × ( 1 − (IM − MM) ÷ Notional ) Which simplifies to Entry × (1 − 1/Leverage + 0.5/MaxLeverage).
The first term is your margin buffer. The second is the maintenance requirement you must keep. Note the two use different leverage numbers — yours, and the market's maximum.
Short liquidation price LiqPrice = Entry × ( 1 + (IM − MM) ÷ Notional ) Same structure, opposite direction. Everything that widens (IM − MM) moves liquidation further away.

Worked on a $10,000 notional on a 20x-max market, entry at $100:

Your leverageIM postedMM (flat 2.5%)Buffer (IM − MM)Long liq. priceAdverse move
2x$5,000$250$4,750$52.5047.50%
5x$2,000$250$1,750$82.5017.50%
10x$1,000$250$750$92.507.50%
20x$500$250$250$97.502.50%

Adverse move needed to reach liquidation on a 20x-max market. The curve is not linear: the last few multiples of leverage remove almost all of the buffer. Going from 10x to 20x halves the distance from 7.5% to 2.5%.

That curve is the whole argument for lower leverage, expressed geometrically. The distance to liquidation does not fall in proportion to the leverage number — it collapses. Doubling leverage from 10x to 20x does not take your buffer from 7.5% to 3.75%, it takes it to 2.5%, because maintenance margin is subtracted before the ratio is applied.

Watch it happen. The Polymarket Perps Simulator draws your liquidation line on a moving practice chart, so you can see how close the price gets. Run your own numbers. The Perps liquidation price calculator takes entry, size, leverage and market max leverage and returns the exact threshold, the percentage distance, and the mark price at which it triggers.

Three states, and the one that gives you options

StateConditionWhat you can doWhat is blocked
HealthyEquity ≥ IMEverything — open, add, reduce, close, withdraw within limitsNothing
Margin callMM ≤ Equity < IMReduce exposure, or deposit collateralOpening or increasing any position
LiquidationEquity < MMThe system acts; you can still depositNew orders until the flag clears

The middle state is the one to plan for rather than fear. It is a wide band — on a 20x position it spans from 2.5% adverse to the full initial margin — and inside it you still have two real choices. Adding collateral raises equity immediately and can restore healthy status in the same second. Cutting size reduces notional, which reduces the maintenance requirement itself, moving the threshold away. Both are decisions. Doing nothing is also a decision, and it is the one that usually ends in the third state.

What happens mechanically during a liquidation

StepWhat the system doesWhat it means for you
1. FlagCross liquidation blocks new orders on every market for the account. Isolated blocks only the affected market.Submissions are rejected while flagged. This is why "I tried to close it and it would not accept my order" happens — the system has already taken over.
2. CancelResting orders inside the same scope are cancelled before the first liquidation order is placed. Cross cancels every cross-margined market; isolated cancels only the affected market.Cancels race in-flight executions, so a resting order can still fill in the moment between flag and cancel. Any fill in the active scope is tagged liquidation: true.
3. CloseReduce-only, immediate-or-cancel, market-priced orders. They sweep whatever liquidity is resting.No protective spread off mark. In a thin book you fill far worse than the threshold. This is the slippage component people never budget.
4. Re-evaluateMargin health re-checked between orders. Partial fills that restore the account stop the process naturally.You can be saved mid-liquidation by the book, not by your own action.
5. RecoverIf equity reaches the recovery initial margin, the flag clears and normal submission resumes. A fully closed position also clears it.Recovery is possible but not something to plan around.

Cross liquidation closes one position at a time, re-evaluating after each fill and picking again from what remains. A multi-position cross account is therefore unwound across several cycles rather than all at once — which is a small mercy, because it gives the book a chance to absorb each leg. Isolated liquidation closes the flagged position in full.

Cross versus isolated is a containment decision, not a preference. Isolated margin funds each position with a dedicated allocation, so a liquidation closes only that position. Cross shares collateral across all cross positions, so unrealised P&L on one offsets margin on another — but a liquidation evaluates and can unwind the whole cross account. The web app opens new positions isolated by default. Cross is opt-in through the API using leverage configuration, and only for instruments that allow it; some markets are isolated-only and reject cross outright.

Beyond order-book liquidation: insurance fund and ADL

There is a level of breach below ordinary liquidation, and it is the part almost nobody reads until it happens to them.

The insurance fund backstop

If equity falls far enough below maintenance margin that order-book liquidation is judged unlikely to recover value — the documented threshold is roughly two thirds of maintenance margin — the system skips the book entirely and absorbs the position into the insurance fund.

ScopeWhat gets absorbed
Cross backstopAll of the trader's cross positions plus their quote-asset balance
Isolated backstopThe specific isolated position and its allocated isolated margin

Once absorbed, the insurance fund holds the position and manages it like any other account. The margin that leaves the trader's account is recorded as a cash transfer, separate from fills, funding and deposits — which matters if you are ever reconciling a balance change after a backstop liquidation, because it will not appear as a trade.

The backstop only fires when the fund can take the position on and remain healthy itself: its equity after absorbing must stay at or above its own maintenance margin. When it cannot, the system does something worse.

Auto-deleveraging

If the breach is severe enough for the backstop but the fund cannot safely absorb it, the position is force-closed directly against traders holding the opposite side.

PropertyDetail
MatchingNone. No order-book matching and no draw on the insurance fund.
ScopeAn isolated liquidation deleverages the affected market only. A cross liquidation deleverages every open cross position the account holds.
Counterparty rankingAdlIndex = ProfitRatio × Notional ÷ Equity — the most profitable and most leveraged go first.
Execution priceIsolated: the liquidated position's bankruptcy price. Cross: the mark price frozen when liquidation started, not the live mark.
DirectionA counterparty position is only ever reduced — never flipped to the other side and never increased.
ExclusionsAccounts that are themselves liquidating, and the insurance fund, are never selected.
FeesNone for either side.
Blocked ordersWhile being deleveraged, a counterparty's new orders on that market are rejected. The block clears automatically once deleveraging completes.

Illustrative ranking only — five hypothetical counterparties scored by AdlIndex = ProfitRatio × Notional ÷ Equity. The highest bar is reduced first. Being right and heavily levered puts you at the front of the queue, which is the counter-intuitive part of ADL.

ADL punishes success. The selection metric multiplies profitability by effective leverage, so the traders who are most right and most levered are reduced first. If you are holding a large leveraged winner during a violent move in your favour, ADL can close part of it at a price you did not choose, with no fee and no vote. The notification arrives as position_deleveraged, and the fill carries adl: true on the WebSocket fills channel.

The withdrawal floor that surprises people

Separate from both margin thresholds, there is a rule governing how much you can take out while positions are open:

Withdrawal margin requirement WithdrawalMarginRequired = max( CollateralReserved , 0.1 × TotalPositionValue ) TotalPositionValue = Σ |PositionSize| × MarkPrice, across cross and isolated positions
Withdrawable = max(0, CollateralValue + CrossUnrealisedPnL − WithdrawalMarginRequired − PendingOrderMargin)

The documented worked example is worth memorising because the asymmetry is unintuitive. A $100 position at 20x needs $5 of initial margin, but reserves $10 for withdrawal purposes. With $20 of collateral, $10 is withdrawable. With only $5 of collateral, the position can still open — but nothing is available to withdraw.

The floor is stricter than initial margin above 10x. At 10x or below, initial margin already covers it. Critically, the 10% floor applies to withdrawals only: it does not raise the opening-margin requirement and does not change the maintenance-margin threshold at which liquidation triggers.

What actually keeps you out of liquidation

PracticeWhy it works mechanically
Set leverage from risk, not from confidenceLeverage decides IM; IM − MM decides liquidation distance. Deriving leverage from a fixed dollar risk makes that distance a computed number rather than a hope.
Put the stop strictly inside the liquidation priceIf liquidation is nearer than your stop, the venue exits you before your own rule fires and the stop becomes decoration.
Use isolated margin on anything speculativeLimits the blast radius to one position instead of the whole cross account.
Keep 10% of notional freeThat is the venue's own withdrawal floor. Below it you cannot move funds, which removes your ability to react.
Watch mark, not last tradeEquity follows mark. A stale chart print is not a risk measurement.
Budget funding into the holdFunding reduces equity every hour, which moves the liquidation price closer without price moving at all.
Cancel resting orders before diagnosing a rejectionPre-trade margin uses worst case including open buys and sells. Resting orders can reject a new order while your current equity looks fine.
Sizing arithmetic is the next page. Leverage and position sizing derives the formula that turns a fixed risk budget into a position size, and explains why effective leverage — notional divided by total equity — is the number that describes real danger.

Frequently asked questions

Does Polymarket Perps use mark price or last price for liquidation?

Mark price. It is used for unrealised P&L, margin checks and liquidation risk. The traded price of the most recent fill is used only for trade history and execution records, and is explicitly not used for margining. This separation exists so that a single small or isolated trade cannot move an account's risk state by itself.

Why does my liquidation price move when I have not changed anything?

For cross positions, the liquidation price depends on available balance — everything in the cross account that is not this position's own equity. Mark moves on other cross positions, size changes or collateral changes can all shift the liquidation price of every cross position simultaneously. Isolated positions are evaluated on their own equity and are not affected by other markets.

Can a liquidation close only part of my position?

Yes. Liquidation orders are reduce-only immediate-or-cancel, and margin health is re-evaluated between them. A partial fill that restores the account stops the process, leaving you with a smaller position rather than none.

Is there a fee on top of a liquidation?

Yes. While flagged, every fill pays an additional liquidation fee rate on top of the normal maker or taker rate: FillFee = Notional × (MakerOrTakerRate + LiquidationFeeRate). Rates vary by market. Auto-deleveraging fills are the exception — they bypass the order book and carry no fee for either side.

What are Disrupted and Halted sessions?

Both describe feed-source health, not your position. Disrupted means external feeds are unavailable or failing sanity checks and the system falls back to whatever feed set is still healthy. Halted means the underlying itself has a trading halt or corporate-action freeze. In both cases the perp continues to match orders; only index and mark sourcing changes.

Where can I verify these mechanics?

Polymarket publishes liquidation mechanics, margin and mark price documentation. Those are the authority; this page is the explanation, and live parameters such as liquidation fee rates and leverage tiers should be read from the instrument data rather than from any article.

Find Your Liquidation Price Before the Market Does

Enter entry price, size and leverage — the liquidation price calculator returns the exact price where the venue closes you, using the flat 2.5% maintenance margin rate. Then decide whether that distance survives normal noise.

Open the Calculator → Open Polymarket →